Air Safety Support International
- Home
- About ASSI
- Legislation and OTARs
- OTARs
- OTARs for Consultation
- OTARs Released for Gazetting
- OTAR 1 Definitions, Abbreviations and Units of Measurement
- OTAR 13 Occurrence Reporting
- OTAR 21 Certification of Products
- OTAR 36 Aircraft Environmental Standards
- OTAR 39 Continued Airworthiness Requirements
- OTAR 43 General Maintenance Requirements
- OTAR 47 Aircraft Registration and Marking
- OTAR 61 Pilot Licences and Ratings
- OTAR 63 Flight Engineer Licences and Ratings
- OTAR 65 Air Traffic Service Personnel Licences and Ratings
- OTAR 66 Aircraft Maintenance Personnel Licensing
- OTAR 67 Medical Standards and Recognition of Medical Examiners
- OTAR 77 Activities Affecting Airspace
- OTAR 91 General Operating Instructions
- OTAR 92 Carriage of Dangerous Goods
- OTAR 119 Air Operator Certification
- OTAR 121 Commercial Air Transport Operations - Large Aeroplanes
- OTAR 125 Complex General Aviation including Corporate Operations
- OTAR 135 Commercial Air Transport Operations - Helicopters and Small Aeroplanes
- OTAR 139 Certification of Aerodromes
- OTAR 140 Rescue and Fire Fighting Services Approval
- OTAR 145 Aircraft Maintenance Organisation Approval
- OTAR 171 Aeronautical Telecommunication Services
- OTAR 172 Air Traffic Service Organisation Approval
- OTAR 173 Flight Checking Organisation Approval
- OTAR 176 Instrument Approach Procedures Approval
- OTACs
- Legislation
- Legislation for Consultation
- Exemptions
- Accident Investigation Regulations
- Safety Development
- Air Traffic Services
- Airworthiness
- Flight Operations
- Aerodromes
- Licensing and Medical
- Policy and Information
- Contact
Related OTACs
The following Overseas Territories Aviation Circular (OTAC) provides additional information and guidance on how to meet the requirements of this OTAR Part:
About PDFs
You will need Adobe Reader installed on your computer to open PDFs. It is available as a free download from the Adobe website.
Home » Legislation and OTARs » OTARs Released for Gazetting » OTAR 121 Commercial Air Transport Operations - Large Aeroplanes
OTAR 121 Commercial Air Transport Operations - Large Aeroplanes: Issue 5
16/07/2010
The requirements of this Part are applicable to the holder of an air operator's certificate issued by the Governor and using any aeroplane having a maximum approved passenger seating configuration of more than 19 seats, excluding any required crew member seat, or a MTWA of more than 5,700 kg.
These OTAR Parts will be subject to further consultation and amendment shortly to incorporate forthcoming amendments to ICAO Annex 6. In view of their limited life and to avoid delaying their release they are published, for this issue, in the same format used for consultation.
All Part 91 requirements apply also to operations subject to OTAR Parts 121, 125 and 135 unless expressly stated: the text of Part 91 either applies as provided or as supplemented in the other applicable Parts. Note that each Subpart F applies only to the aircraft contained within the scope of that OTAR Part.
Appendices associated with a specific requirement are contained within the Subpart (after the last paragraph in the Subpart). Appendices that are applicable to more than one requirement or Subpart are provided at the end of the Part.
The technical description of the Performance Classes is in Appendix E of Part 91. The performance requirements are contained in Subpart E of each Part and, where compliance with Performance Classes is required, Appendix E is referenced.
The Rules of the Air (Schedule 8 of the AN(OT)O) are reproduced in Appendix D of Part 91 which, due to the limitations of this format, is contained in a separate document below. Similarly, Tables referred to in the OTAR text are provided in the separate Tables document below.
The Index document below is provided to assist in locating paragraphs in the requirements.